Used to split or branch irrigation pipes with a reduced outlet size
| Main Line Size (mm) | Branch Size (mm) | Configuration | Typical Application |
|---|---|---|---|
| 16 × 16 × 12 mm | 12 mm | Reducing Tee (T-shape) | Branching from 16 mm to smaller line |
| 16 × 16 × 8 mm | 8 mm | Reducing Tee | Connect microtube to main 16 mm pipe |
| 20 × 20 × 16 mm | 16 mm | Reducing Tee | Mainline 20 mm to lateral 16 mm |
| 25 × 25 × 20 mm | 20 mm | Reducing Tee | High-flow mainline to standard drip line |
| 32 × 32 × 25 mm | 25 mm | Reducing Tee | Mainline to medium-flow branch |
| 32 × 32 × 16 mm | 16 mm | Reducing Tee | For reducing directly to dripline from large pipe |
Material: UV- and chemical-resistant polypropylene or polyethylene
Barbed Ends: All three sides are barbed for secure push-fit into PE/LDPE pipe
Use: Used in drip irrigation systems to split a line with one reduced outlet
Sealing: Usually no clamp needed for low pressure; clamps optional for higher pressure
Pressure Rating: Typically up to 4–6 bar
Flow Direction: T-shaped with equal main line and reduced outlet
Reviews
There are no reviews yet.