BUSH FIT TECHNICAL TCE
🧩 TECHNICAL DATA SHEET
.
🔧 Variants
Straight male adapter (tube to male thread)
Elbow male adapter (90° angle)
Tee branch male adapter
Cross male adapter
📐 Materials & Seals
Body: Nickel-plated brass (standard) or 316/316L stainless steel (optional)
Collet: Stainless steel claw grips tube
Seal: NBR (brass model) or FKM/Viton (stainless)
Thread O‑ring: provides leak-tight threaded seal
🛠️ Connection Types
Tube end: 6 mm O.D. push-fit
Thread end: M5×0.8, M6×1, BSPT 3/8 (R 1/8), NPT, etc. depending on variant
Orientation: Straight, 90° elbow, tee, or cross
💪 Performance Specifications
| Parameter | Brass (PC 06-M5 / PC 06-M6 / PC 06-03) | Stainless (SPC 06-M6L) |
|---|---|---|
| Tube O.D. | 6 mm | 6 mm |
| Thread type & size | M5×0.8, M6×1, BSPT 3/8 | M6×1 |
| Max Working Pressure | 1.0 MPa (150 psi) | 2.0 MPa (290 psi) |
| Proof Pressure | 3.0 MPa (435 psi) | 3.0 MPa (435 psi) |
| Vacuum Rating | –100 kPa | –100 kPa |
| Temp. Range | –20 to +80 °C (brass, PC06-M5) <br> 0 to +60 °C (PC06-M6) | –20 to +150 °C (316L, SPC06-M6L) |
| Fluids | Air, vacuum, water (no freezing) | Plus steam & higher temp fluids |
| Tube Materials | PU, PA, PE, PVC | Same |
🔧 Dimensional Overview (Straight PC 06-M5 / PC 06-M6)
Example dimensions for PC 06-M5 (M5 thread):
Tube O.D.: 6 mm
Thread: M5×0.8
Pressure port ØP: 11.8 mm
B length (body): ~22 mm
L overall length: ~15.5 mm
H1 hex height: ~12 mm
Additional size details:
For PC 06-M6, length increases to ~16 mm and thread is M6×1
🛠️ Installation & Use
Cut tube square; insert fully until collet grips.
Tighten male thread end hand-tight or with wrench against O-ring.
To release tube, push collar or sleeve and pull out tube.
Suitable for assembly in confined spaces (collet and hexagon design)
✅ Summary
Tube Size: 6 mm O.D.
Thread Options: M5×0.8, M6×1, BSPT 3/8, etc.
Materials: Brass or 316L stainless steel
Working Pressures: 1.0 – 2.0 MPa; proof at 3.0 MPa
Temperature Ranges: up to +80 °C (brass), +150 °C (stainless)
Seal: NBR or FKM O-ring
Applications: Pneumatic, water, vacuum, steam, and process fluids